Battle Control

Switch to Manual Combat

Full Steam release · Sources checked November 19, 2026

The short answer

To command units manually in Imperionis, turn off Autobattle in Settings or in the window before the engagement. Then issue orders on the hex grid. If an action is unavailable on the updated build, click its disabled button to read the reason before you change the plan.

On this page

Pick the setting at the right moment

Open Settings if you want to set the mode before reaching a battle. If the pre-battle window is already open, use the option there for the engagement in front of you. The English Steam description confirms both entry points. Check the label and its current state before you confirm the encounter. In an older build, the Day One notes specifically call out repair of the Settings toggles, including Autobattle.

A useful starting test is an engagement you are about to enter. When the battle opens, check whether you can select and issue commands to the units on the hex grid. In Autobattle, you observe the two sides acting on their own in real time. In manual combat you control the units turn by turn. If you get the real-time behavior when you expected turns, check the pre-engagement switch again on your next attempt. The source confirms how to choose before combat and does not document a mid-battle mode change.

Use the disabled-button hints during your turn

On the controls update, click the button you cannot use and read its short explanation. Separate a resource shortage from an exhausted action or a cooldown. If it says a resource is missing, choose an order the unit can afford. If the unit has no actions left, choose another available unit or proceed when the turn allows it. If a cooldown is the reason, use a different available action and check again when the interface indicates that it is ready.

Consider whether the hint is explaining this specific action or your wider concern. For example, a cooldown explains why a button is disabled right now. It says nothing about whether the unit would be the best choice for a particular objective next turn. Use the hint to remove the immediate uncertainty, then choose a command based on the objective and which units remain available.

If every unit continues acting independently, return to the mode check before diagnosing a command button. If manual selection is working and only one control is unavailable, use the hint for that control first. That order of checks helps you distinguish a mode selection problem from a normal restriction on one unit.

Separate camera and menu controls from orders

The Day One notes say F11 toggles fullscreen on the updated Steam build. That is useful when your issue is the size or state of the game window. It does not select how the century fights. The later controls update says Esc opens the quit menu even in battle. If you press it while trying to inspect an order, read and close the prompt as appropriate before continuing your commands.

The developer also describes personal encounters involving the commander. Those are separate from moving the century on the map and are likewise described as having manual and automatic play options. Check which encounter you are entering before applying a control assumption from the other view.

What to check before you move on

You can issue an order to a unit on the hex grid. When an order is disabled, you can tie the immediate restriction to the explanation shown by the game.

Sources & version

Release notes and developer replies linked below. is the guide’s revision date.